Panasonic AV-HS400 - Manual (Page 8)

Printed in Japan
Video processing
M/E
Input
Output
WIPE/DVE
Transition
KEYER
PinP
Interface
Removable media
Power
Dimensions (W x H x D)
* Features and specifications in this document are subject to change without notice due to continual improvements.
Pattern
Transition method
Transition type
Key source
Key fill
Key mode
Transition method
Transition type
Serial (EDITOR)
Tally output
GPI
Ethernet
SD memory card slot
WIPE x 12, Squeeze x 11, SLIDE x 8, 3D DVE x 12 (3 directions)
Excluding 3D, selection with key transition is possible independently
of background.
FADER, AUTO
Cut, mix, wipe (including DVE), background and
key can be selected.
BUS
BUS, MATTE
Linear key, Lum key, Chroma key (Key only)
AUTO (PinP only)
MIX
Dsub9pin x 1: RS422A (GVG protocol compatible)
Dsub15pin x 1, open collector output
¿ 3.5 Stereo mini jack
100 Mbps/10 Mbps x 1 (Service purpose)
1 (for transferring still image files and providing an upgrade capability)
AC 220 V to 240 V, 50 Hz/60 Hz
420 mm x 132 mm x 408 mm (excluding protrusions)
Specifications
Dimensions
SD Logo is a trademark.
Video format
Video processing
Video
Key
DSK
Reference
Video
Reference
SD (480/59.94i, 576/50i),
HD (1080/59.94i, 1080/50i, 720/59.94p, 720/50p)
1M/E
Y:Cb:Cr, 4:2:2 10 bit
RGB, 4:4:4 8 bit
4 inputs (HD/SD-SDI)
Option: A maximum of four inputs (up to 2 boards each of 2 of
3 types of input boards can be added: HD/SD-SDI x 2,
HD/SD-analog x 2, DVI/RGB x 2).
Assign one out of video inputs
Assign one out of video inputs
Black burst/TRI (loop through) x 1
Standard: Four outputs (PGM x 2, general-purpose x 2,
each HD/SD-SDI )
Option: A maximum of four outputs (up to 2 boards each of
2 types of output boards can be added: general-purpose x 4, each
HD/SD-analog x 2, DVI/analog x 1 each).
The six general-purpose output interfaces (OUT1 to 6) above are
assignable as PGM, PVW, AUX, multi-screen and keyout.
Loop through x 1 (Genlock),
Black burst x 1 (internal synchronization)
AV-JECHS40007
22
mm
420 mm
408
mm
132 mm