Panasonic 1200N - Manual (Page 233)

Glossary S
Centillion 1200N ATM Switch User Manual B-71
NTP 297-8103-903
Split System
A switching system which implements the functions of more than one logical node.
SPTS
Single Program Transport Stream: An MPEG-2 Transport Stream that consists of
only one program.
SR
Source Routing: A bridged method whereby the source at a data exchange
determines the route that subsequent frames will use.
SRF
Specifically Routed Frame: A Source Routing Bridging Frame which uses a
specific route between the source and destination.
SRT
Source Routing Transparent: An IETF Bridging Standard combining Transparent
Bridging and Source Route Bridging.
SRTS
Synchronous residual Time Stamp: A clock recovery technique in which difference
signals between source timing and a network reference timing signal are
transmitted to allow reconstruction of the source timing at the destination.
SSCF
Service Specific Coordination Function: SSCF is a function defined in Q.2130, B-
ISDN Signaling ATM Adaptation Layer-Service Specific Coordination Function
for Support of Signaling at the User-to- Network Interface.
SSCOP
Service Specific Connection Oriented Protocol: An adaptation layer protocol
defined in ITU-T Specification: Q.2110.
SSCS
Service Specific Convergence Sublayer: The portion of the convergence sublayer
that is dependent upon the type of traffic that is being converted.
SSO
Switch Specific Overhead