Panasonic SA-XR55 - Manual (Page 23)

23
R
Q
T
7994
C
o
nne
ct
ion
s
Se
tt
ings
B
asic
O
p
era
tio
n
s
Bef
o
re
use
Ope
ra
tions
Re
fe
re
n
ce Select if noise is excessive during radio reception.
Preparation: Enter the MULTI CONTROL. (ápage 22 “Basic operations with the MULTI CONTROL”)
Preset tuning
Presetting stations
n Auto presetting
1 Set the channel reception to FM 87.9 MHz or AM
530 kHz.
Preset channels that are automatically assigned by this unit are:
FM: 1 to 30
AM: 21
to 30
Preset the FM stations first. If the AM stations are preset before the
FM stations, they will be erased when the FM stations are preset.
2 Enter the MULTI CONTROL.
(ápage 22 “Basic operations with the MULTI CONTROL”)
3 Select “TUNER ” and press [ENTER].
4 Select “AUTO MEM ” (AUTO MEMORY) and
press [ENTER].
5 Select “START ” and press [ENTER].
• Select “ CANCEL ” to cancel.
START,
CANCEL
• During automatic presetting, the memory indicator ( ) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
• Frequencies may not preset correctly when broadcast waves are too
strong or too weak. In such cases, carry out presetting manually.
CANCEL
MULTI
CONTROL
M
n Manual presetting
1 Tune to the station you want to preset.
(ápage 22)
2 Enter the MULTI CONTROL.
(ápage 22 “Basic operations with the MULTI CONTROL”)
3 Select “TUNER ” and press [ENTER].
4 Select “MEMORY ” and press [ENTER].
5 Select a channel number and press [ENTER].
“ STORED ” is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune another
station from step 1.
6 Press [MULTI CONTROL, CANCEL] 2 times to
select “EXIT ” and press [ENTER].
• Even if the AC power supply cord is disconnected from the household AC
outlet, the stations remain in the memory for approximately two weeks.
• FM stations can also be preset in the MONO mode. (ábelow)
CANCEL
MULTI
CONTROL
Listening to preset stations
n On the remote control
• Select the channel
• Press the numbered buttons to select the channel
To select a two digit number
e.g. 21: [ ≧ 10, ENTER] → [2] → [1]
n On the main unit
1 Press.
2 Select the channel.
After 5 seconds, the display will change from the channel number
to the frequency.
• Hold down the button to change channels faster.
Reducing excessive noise
n During FM stereo reception
You can improve FM reception by switching reception to monaural.
n During AM reception
When there is a lot of noise interference with an AM broadcast, try
switching to this mode.
1
Select “TUNER ” and press [ENTER].
1
Select “OPTION ” and press [ENTER].
2 Select “FM MODE ” and press [ENTER]. 2 Select “B PROOF ” (BEAT PROOF) and press [ENTER].
3 Select “MONO ” and press [ENTER].
• Select “ AUTO ” to cancel.
AUTO,
MONO
3 Select “MODE A ” or “MODE B ” and press [ENTER].
4 Press [MULTI CONTROL, CANCEL] 2 times to select
“EXIT ” and press [ENTER]. 4 Press [MULTI CONTROL, CANCEL] 2 times to select
“EXIT ” and press [ENTER].