Philips VR 510/07 - Manual (Page 38)

38 38
R
EPLAYING CASSETTE CONTINUOUSLY
E
NGLISH
RReeppllaayyiinngg ccaasssseettttee ccoonnttiinnuuoouussllyy
This function can be used to play a tape over and over again. If
the end of the cassette or of the recording has been reached, the
video recorder automatically rewinds to the start of the tape and
starts to play back again.This function is activated or deactivated
as follows:
1 Press the M MEEN NU U button on the remote
control.The on-screen menu appears
2 Use ==PP-- or ;;PP++ to select the option
“SPECIAL SETTINGS” and confirm
with O OK K
4 Use S S++ P P or Q QS S-- to select the setting
“ON” (continuous playback) or “OFF” (no
continuous playback) and confirm with O OK K.
The screen will show the message “STORED”
3 Use ==PP-- or ;;PP++ to select the option
“REPEAT PLAY”
7 Press the Playback button C C to start the
playback or continuous playback (depending
on the setting)
5 Complete the adjustment of continuous
playback with the M MEEN NU U button
6 Insert a cassette without erase protection
PP
A ARRD DO ON N
??
W Whhaatt iiss eerraassee pprrootteeccttiioonn??
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
ä
SPECIAL SETTINGS
OSD ON
CLOCK DISPLAY OFF
COUNTER QT.LEFTP
SAT RECORDING OFF
REPEAT PLAY OFF
OK