Philips VR 510/07 - Manual (Page 8)

C
ONNECTING TO A
TV
SET WITHOUT SCART SOCKET
E
NGLISH
8 8
5 Take a scart cable and connect one end to the
scart socket on the back of your TV set and
the other to the scart socket A AVV11 EEX XTT11 on
the back of the video recorder
PPRRO OBBLLEEM M
8 8 M Myy TTVV sseett hhaass m moorree tthhaann oonnee ssccaarrtt ssoocckkeett
4 4 Then you have a more modern TV set. Please
check first (with the aid of the operating
instructions for the TV set), which of the available
scart sockets is intended for use with the video
recorder.
6 Take the enclosed mains cable and connect
the appropriate end to the mains socket 4 4
on the back of the video recorder and the
other to the nearest free socket
1 Have the following cables (provided with your
new video recorder) ready: An aerial cable
and a mains cable
2 Switch off your TV set
C Coonnnneeccttiinngg ttoo aa TTVV sseett w wiitthhoouutt aa ssccaarrtt ssoocckkeett
8 You can find more details in the chapter
“Initial Installation”
7 Your set should automatically switch over to
the programme number allocated to video
recorder operation (usually: EXT, 0 or AV).You
will see the welcome screen.
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
CONTINUEPOK
PPRRO OBBLLEEM M
8 8 M Myy ssccrreeeenn iiss ssttiillll bbllaannkk
4 4 If a TV set receives a signal via the scart socket, it
usually switches automatically to the
corresponding programme number. This
automatic function might be adversely affected.
Please switch manually to the corresponding
programme number (usually: EXT, 0 or AV)
4 4 Check the cable connections
Aerial cable
Mains cable
AV1 EXT1