Philips T2132 - Manual (Page 13)

Playing a Videotape 13
• If the tape you want to play is
already in the TV/VCR/DVD,
turn on the power. Press
SELECT to choose TV/VCR
mode (the red VCR/TV light
will be on), then press
PLAY B.
• When you play an S-VHS
format tape, you cannot get
the high resolution that would
be available on an S-VHS VCR.
Noise lines (black and white
streaks) may appear in the
picture.
• If you press SELECT while
playing a videotape, playback
will stop and the unit will
switch to DVD mode.This will
happen also if you press
PLAY B (DVD) or
OPEN/CLOSE A (DVD) on
the front of the TV/VCR/DVD
during videotape playback.
Helpful Hints
Follow these steps to simply play a videotape. Videotape
playback options are on pages 35-41.
1 Insert a videotape in the cassette
compartment of the TV/VCR/DVD. The power
will come on. If the tape’s record tab is missing,
playback should start automatically.
2 If playback does not start automatically, press
PLAY B to start playback.
3 Press STOP C to stop playback.
4 Press j / h to rewind the tape.
Press i / g to fast forward the tape.
5 Press STOP/EJECT C C /A A on the front of the
TV/VCR/DVD to remove the tape.
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURN TITLE SETUP
A-B
REPEAT SEARCH MODE CLEAR
MODE ANGLE SUBTITLE AUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON PICTURE SELECT SLEEP
CH.
VOL.
MUTE
ZOOM
1 2 3
4 5 6
7 8 9
0 +10
+100
REPEAT
2-4
T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 13