Philips T2132 - Manual (Page 28)

28 One-Touch Recording
PLAY
STOP
ENTER
RECORD
DISC
MENU
RETURN TITLE SETUP
A-B
REPEAT SEARCH MODE CLEAR
MODE ANGLE SUBTITLE AUDIO
DISPLAY
SPEED C.RESET
STANDBY-ON PICTURE SELECT SLEEP
CH.
VOL.
MUTE
ZOOM
1 2 3
4 5 6
7 8 9
0 +10
+100
REPEAT
2
4
1
3
Press REC/OTR I on the
front of the TV/VCR/DVD.
A One-Touch Recording (OTR) is an immediate timed
recording from 30 minutes to 8 hours long.
Before you begin ...
● Turn on the TV/VCR/DVD.
● Press SELECT to put the unit in TV/VCR mode.
The red VCR/TV light will appear on the front of the unit.
● Insert a videotape with its erase prevention tab in place.
Details are on page 8.
1 Press the Number buttons or CH.
▲/▼to select
the channel you want to record.
Remember, if the TV/VCR/DVD is connected to a
Cable Box/Satellite Receiver, the TV/VCR/DVD must
be on channel 3, 4 or AUX.
Select the channel you want to record at the Cable
Box/Satellite Receiver. Details are on page 9.
2 Press SPEED to select a tape recording speed
(SP or SLP). Details are on page 27.
3 Press REC/OTR I on the front of the
TV/VCR/DVD repeatedly to select a recording
length. Recording will start immediately.
Each press of REC/OTR I will increase the recording
time by 30 minutes.The maximum recording length is
8 hours.
4 Press STOP C to stop a one-touch recording
before its designated end time. Otherwise,
recording will stop at the time you designated.The
TV/VCR/DVD will turn off when the OTR ends.
OTR (2:30)
SP
• You cannot start an OTR with
the RECORD button on the
remote control.
• To show the remaining
recording time, press DISPLAY.
OTR and the remaining
recording time will appear
briefly in the top left corner of
the screen.
• If the tape ends before the
recording’s end time, the
TV/VCR/DVD will stop
recording, eject the tape, and
turn itself off.
• An OTR will continue even if
you turn off the TV/VCR/DVD.
The flashing REC/OTR light
indicates the recording is still in
progress.
• To change the recording length
while an OTR is in progress,
press REC/OTR I repeatedly.
• You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.The
timer recording will not take
place.
Helpful Hints
T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 28