Panasonic DP-6530 - Manual (Page 151)

1
2
3
4
5
6
7
8
9
10
11
12
7-23
7 Close the lower cover of the finisher. Test stapling
is then automatically performed on a blank sheet.
- This operation is carried out to avoid blank stitching.
If test stapling fails to be performed and the following
message remains displayed, repeat the above procedure
from steps 1 to 7.
Set staple cartridge
6 Make sure that the finisher is attached to the
machine firmly and that LD, LT-R size paper is set
in the machine.
- If one of the above paper sizes is not set, test stapling cannot
be performed.