Panasonic NN-CD987W - Manual (Page 21)

-9-
Operation
&
Hints
Convection Cooking:
Just like a conventional oven, the convection oven has a heating element to give the dry heating needed to
produce crisp, browned exteriors . Convection cooking has the addition of a fan to produce conventional results
with a slightly reduced cooking time . Convection cooking temperatures range from 00˚C to 250˚C . Most
conventional recipes will be suitable for use . Follow the minimum suggested cooking times and add additional
time if required . Convection recipes are also available throughout the recipe section of this book .
2 Level Convection:
2 Level Convection is available for when you wish to cook a larger quantity of food . The entire oven cavity may
then be utilised . For example, cooking two trays of biscuits .
NOTES:
 . Place Ceramic Tray correctly in the oven before preheating .
2 . If the oven door is not opened after the completion of preheating, the oven will maintain the selected
temperature for 30 minutes . After 30 minutes, the oven will shut off automatically and revert to the time of
day .
3 . If preheating is not required for the food you are cooking, eliminate step 3 .
4 . When selected cooking time is less than one hour, the time counts down by minutes and seconds .
5 . When selected cooking time is more than one hour, the time counts down by hours and minutes until only
“H 00 ( hour)” remains . Then the display then counts down by minutes and seconds .
6 . 2 Level Convection is not available for 2 or 3 stage cooking .
To set Standing Time
Using the Timer Pad, you can program ) a Stand Time after cooking is completed or 2) a minute timer .
NOTES:
 . Three stage cooking can be programmed including a Stand Time .
2 . If the oven door is opened during the Stand Time, the time in the display window will continue to count
down .
3 This feature may also be used as a timer . In this case, eliminate first step .
To Cook on Convection/2 Level Convection
(continuance)
e .g . STEP 1: STEP 2:
Select the
desired
cooking
program .
Press
Timer pad .
Set the desired
amount of time .
(up to   /
2
hours)
Press Start pad .