Philips VR675CG - Manual (Page 4)

2
Connecting cables
1 Remove the aerial cable plug from your TV set and insert
it into the
2 socket at the back of the video recorder.
2 Plug one end of the aerial cable provided into the
3
socket on the video recorder and the other end into the
aerial input socket on your TV set.
3 If your television does not have a scart (AV-Euro) socket
please do not read further here, but turn to Chapter 4,
’SPECIAL FEATURES’. In the section ’Playback via the
aerial cable’ you will find further information.
4 Insert the plug of a scart cable into the scart socket
EXT.1 at the back of your video recorder. Connect the
other plug to the TV set.
5 Insert the female plug of the mains cable into the mains
socket
4 at the back of the video recorder.
6 Plug the other end of the mains cable into the wall
socket.
Important notes for operation
• Many televisions switch automatically to the ’EXT’
(EXTernal) or ’AV’ (Audio/Video) programme number
when a video cassette is played back.
If the television does not switch automatically, you will
have to select the ’EXT’, ’0’, or ’AV’ programme number
on the TV set manually.
• Keep your video recorder connected to the mains and the
power switch in ’on’ position at all times to ensure that
programmed recordings can be made and that the
television functions normally. The power consumption
required is low.
• The video recorder switches on automatically as soon as
you insert a cassette or press the P q button.
• If the video recorder is not used for a few minutes in
some functions, it switches to standby automatically.
• Back-up power supply: TV channel storage - typically 1
year, Clock/Timer - 30 minutes
• If you switch the video recorder to standby using the
STANDBY m
button, the current time will appear in the
display, e.g.: ’20:00’ .
If the clock has not been set, ’--:--’ will appear in the
display.
Connecting additional equipment
You can also connect additional equipment to the EXT.2
socket, for instance, satellite receiver, decoder or camcorder.
You can connect a HIFI-stereo set to the sockets
L AUDIO OUT (left channel) and AUDIO OUT R (right channel).
1. INSTALLATION