Bbc1, Recording, Long play function – Philips VR675CG User Manual
Page 9
7
1
Insert a cassette or switch the video recorder on with the
P
q
button.
2
Use the
P
r
or
P
q
button or the
0-9
buttons to
select the programme number from which you wish to
record, e.g.: ’P 01’ .
BBC1
3
Press the
RECORD
n
button.
0:00
4
To stop recording, press the
STOP
h
button.
Long play function
You can reduce the recording speed by half. This makes it
possible to record, for example, 8 hours instead of 4 hours on
an ’E240’ cassette.
Before recording, with the video recorder switched on, select
the ’LP’ (=LongPlay) recording speed by pressing the
SP/LP
button. ’LP’ will appear in the display.
Note: During picture scanning, still picture and slow
motion colour playback may be poor.
* You will obtain the best picture quality when recording
at standard speed (’SP’).
Some general notes for recording
• Recording from external sources: Programme numbers
’E1’ and ’E2’ are provided for recording from external
sources (via the
EXT.1
or
EXT.2
scart socket).
• OTR - recording: If you do not want to record to the end
of the cassette, press the
RECORD
n
button again. The
display shows at what time the recording will stop. With
each subsequent press of the
RECORD
n
button you can
add 30 minutes to this time.
You can return to the normal recording status by pressing
the
CLEAR (CL)
button.
• Stereo reception: This video recorder can record stereo
transmissions. The playback of HiFi recordings has HiFi
quality.
• Erase protection: So that you don’t accidentally delete an
important recording, you can remove the special tab
(erase protection) on the narrow side of the cassette with
a screwdriver or slide the special tab to the left.
Later, if you no longer want the cassette to be erase
protected, you can seal the gap again with adhesive tape
or slide the special tab to the right.
• Auto-assembling: You can use the auto-assembling func-
tion to join individual recordings without any major
picture disturbance between the recordings. During
playback, search for the correct position on the tape and
then press the
STOP
h
button.
9
will appear in the
display. Now you can start recording as usual by
pressing the
RECORD
n
button.
During Stop
h
or Pause
9
you can switch between the
display for TV-channel name and tape position, using the
OK
button.
3.
RECORDING