Adjust the volume level, Adjust display brightness, Activate the backlight blinking function – Philips AJ3138 User Manual
Page 16
Advertising
»
When the sound is recorded, is displayed.
Tip
•
Keep the sound source close to mic on the top of the unit.
• To play the recorded sound, press rec/play.
»
is displayed.
Adjust the volume level
1
Rotate
volume to increase/decrease the volume level.
Adjust display brightness
1
Press
repeat alarm/brightness control repeatedly to turn on/off
the backlight of the display.
Activate the backlight blinking function
1
Press and hold repeat alarm/brightness control for 5 seconds.
»
The backlight blinks.
»
When the alarm rings next time, the backlight blinks for 3 minutes.
To deactivate the backlight blinking function
1
Press and hold repeat alarm/brightness control for 5 seconds
again.
Advertising