Philips SE245 - Manual (Page 31)

29
7 Clock & Alarm
If you subscribe to your
network’s Caller Identifi cation
service, the time on your
SE245 may be set automatically
each time you receive a call,
depending on your network
provider.
You can also set or adjust the
time using the Clock & Alarm
menu.
7.1 Set date and time
1
Press , scroll to
CLOCK/ALARM and press
.
Display shows DATE & TIME .
2
Press . Enter the date in
the format DD-MM e.g. 04
08 for 4 August and press
.
3
Enter the time using the
24 hour format HH – MM,
e.g. 14 45 for 2.45pm and
press
to confi rm.
4
Press to return to
standby.
Tip
Press to cancel at any time.
7.2 Set alarm
1
Press , scroll to
CLOCK/ALARM and press
.
2
Scroll to SET ALARM
and press .
3
Scroll or to OFF ,
ON ONCE or ON DAILY and
press .
4
If you select ON ONCE or
ON DAILY , enter the time
using the 24 hour format
HH – MM, e.g. 14 45 for
2.45pm and press
.
5
Press to return to
standby.
When the alarm goes off, press
any key to stop the ring.
Note
• Once the alarm is set to on,
the icon is displayed.
• The alarm will ring at the
medium level. ALARM ON
and the will fl ash on the
display.
Clock & alarm