Philips SE245 - Manual (Page 36)

34
9.2 Dial mode
The default SE245 dialling mode
is suitable for your country
and network. It is unlikely that
you should need to change this
setting unless advised to do so.
1
Press , scroll to
ADVANCED SET and press
.
2
Scroll to DIAL MODE
and press .
3
Scroll or
to select
TONE or PULSE and press
to confi rm.
4
Press to return to
standby.
9.3 Call barring
Prevent certain numbers from
being dialled from your SE245.
Store up to four specifi c
numbers, each up to 4 digits
– for example, international or
local prefi xes.
Bypass call barring by switching
the setting Off or On.
Note
If you switch Call barring
on,
BARR MODE ON will be
displayed on your screen in
standby mode.
9.3.1 Switch call barring
on/off
1
Press , scroll to
ADVANCED SET and press
.
2
Scroll to CALL
BARRING and press .
3
Enter the master PIN
(default setting 0000) and
press
.
4 MODE is displayed.
Press .
5
Scroll or to select
ON or OFF and press
to confi rm. You can now set
the number (see below).
9.3.2 Set a number to be
barred
1
Press , scroll to
ADVANCED SET and press
.
2
Scroll to CALL
BARRING and press .
Advanced settings