Philips SE245 - Manual (Page 39)

37
4
If necessary, scroll
REGIST. BASE and press
.
5
Enter the number of the
base on which you wish to
register your handset.
If you have only 1 base
station, press
. If you
have 2 base stations, press
or , etc.
The display shows
SEARCHING .
When the handset registers
with the base, it is assigned
the next available handset
number (shown in the handset
display).
9.5.2 Select a base
You can register your SE245
handset with up to 4 bases.
Once registered, you can switch
between bases, for example,
bases at home and at work.
1
At the handset, press
and scroll to
ADVANCED SET and press
.
2
Scroll to
REGISTRATION and press
.
3 SELECT BASE is displayed.
Press .
The available bases are
displayed with number of the
current base fl ashing.
4
Scroll or to the
base you want – 1, 2, 3 or 4
– and press
.
When the base is found
you hear a beep. If not
found, the display shows
UNREGISTERED .
9.5.3 Unregister a handset
1
At the handset, press
and scroll to
ADVANCED SET and press
.
2
Scroll to UNREGISTER
and press .
3
Enter the 4-digit master
PIN and press .
4
Scroll or to the
handset you want to
unregister and press
.
UNREGISTERED is displayed
on the handset screen.
Advanced settings