Philips DVD740VR/001 - Manual (Page 20)

20
English
VCR Operation
S
HOW
V
IEW
® Guide Channel Set
First, fill in the boxes below:
Write your local channel numbers in "VCR
Channel" column, corresponding "TV-Station"
and "GUIDE Channel" columns, using see
your TV guide magazine or the TV listings of
your local newspaper.
Guide
Channel
TV-Station
VCR
Channel
Now, compare the channel numbers you have
written in the GUIDE Channel and VCR
Channel columns.You must set all of these
channel numbers that don't match using the
following procedure before you programme
the automatic timer recording using the
S
HOW
V
IEW
system.
● This setting only needs to be set once, but
must be done again if you use this DVD/VCR
in another area by moving it.
1 Press the VCR button, then the MENU but-
ton.
2 Press the PLAY B or STOP C button to
select INITIAL, then press the FF g button.
3 Press the PLAY B or STOP C button to
select GUIDE CHANNEL, then press the FF
g
button.
4 Press the PLAY B or STOP C button to
select the relevant mode.Then, press the FF
g
button.
● To set the guide channel individually, select
MANUAL.Then, press the FF g button and
continue with step [5].
● To set all of the guide channels to AV1,AV2,
or AV3 select “AV1”, “AV2”, or “AV3”.Then,
press the MENU button to exit.
5 Press the PLAY B or STOP C button to
select the position number, then press the FF
g
button.
6 Press NUMBER, the PLAY B or STOP C but-
ton to enter guide channel number, then
press the FF g button.
● Press the REW h button to cancel the
number.
● You can select guide channels 1-255.
● To select channels from 1 to 9, first press “0”
twice then 1 to 9.
● To select channels from 10 to 99, first press
“0” once then press the last two digits. (To
select channel 80, first press “0” then press
“8” and “0”).
To set another, repeat steps [5] to [6].
7 Press the MENU button to exit.
Position Number
Gudie Channel Number
GUIDE CHANNEL
P96 : 99
P97 : ---
P98 : 80
P99 : ---
AV1 : ---
AV2 : ---