Panasonic AJ-HD150FE - Manual (Page 69)

– 69 –
Setup menus
USER menu
<BASIC> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
006 DISPLAY 0000 TIME
SEL 0001 T&STA
0002 T&S&M
0003 T&RT
0004 T&YMD
0005 T&MDY
0006 T&DMY
007 CHARA 0000 0
H-POS : :
0006 6
: :
0037 37
008 CHARA
V-POS
0000 0
: :
0023 23
: :
0032 32
009 CHARA 0000 WHITE
TYPE 0001 W/OUT
010 MONI 0000 MANU
CONTROL 0001 AUTO
The underline on the setting item denotes the initial setting.
This selects what displays such as the time code are to be
superimposed onto the HD SDI OUT3, SD SDI OUT3 and
VIDEO OUT3 connector signals.
0: Time only
1: Time and operation mode
2: Time, operation mode and mode
3: Time and REC TIME
4: Time and REC DATE (year, month, day)
5: Time and REC DATE (month, day, year)
6: Time and REC DATE (day, month, year)
<Note>
1. The following modes are displayed in accordance with the
format used.
<Format> <Display>
DVCPROHD # DVCPRO_HD
DVCPRO50 # DVCPRO_50
DVCPRO # DVCPRO
DV # DV
DVCAM # DVCAM
2. With the 2 (T&S&M) setting, an error message is displayed
when a warning or error has occurred.
3. REC TIME and REC DATE are displayed only in DV/DVCAM
format playback mode. Operation mode is displayed in
DVCPROHD/DVCPRO50/DVCPRO format mode.
This selects the horizontal position of the characters used for
the time code and other displays which are superimposed
onto the HD SDI OUT3, SD SDI OUT3 and VIDEO OUT3
connector signals.
<Note>
1. When this item has been set, the output is given to each
OUT3 connector in a state of DISPLAY SEL even with
SUPER OFF. However, when MENU is exited, the displays
comply with the SUPER OFF or ON setting.
CHARA TYPE is output to the each OUT3 connector in the
status set on the MENU.
This selects the vertical position of the characters used for the
time code and other displays which are superimposed onto
the HD SDI OUT3, SD SDI OUT3 and VIDEO OUT3
connector signals.
<Note>
1. When this item has been set, the output is given to each
OUT3 connector in a state of DISPLAY SEL even with
SUPER OFF. However, when MENU is exited, the displays
comply with the SUPER OFF or ON setting.
CHARA TYPE is output to the each OUT3 connector in the
status set on the MENU.
This selects the display type for the SETUP MENU, etc. and
the displays superimposed onto the HD SDI OUT3, SD SDI
OUT3 and VIDEO OUT3 connector signals.
0: White characters on a black background
1: White characters with black edges
This sets whether the recorder is to be forcibly set to the EE
status and the player’s playback signals are to be output to
the monitor by pressing the PLAYER button on the recorder
when the monitor has been connected only to the recorder
during deck-to-deck editing.
0: The EE status is not forcibly established.
1: The EE status is forcibly established, and the player’s
playback signals are output.