ProForm GT 95X PFEX3096.0 - Manual (Page 4)

4
M8 Nylon
Locknut (47)–4
M8 Split
Washer (66)–4
M6 x 38mm Button
Screw (46)–4
M6 x 20mm Button
Screw (52)–4
M4 x 16mm
Screw (64)–4
M8 x 75mm Carriage
Bolt (43)–2
M8 x 75mm Button
Screw (44)–2
M10 Split
Washer (48)–4
M4 x 10mm
Screw (54)–8
M10 x 25mm Button
Screw (50)–4
M8 x 38mm Button
Bolt (45)–4
M8 x 15mm
Screw (42)–6
M8 x 19mm
Washer (65)–4
M8 x 18mm
Washer (41)–2
M8 Acorn
Nut (29)–2
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and Phillips
screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a
part is not in the parts bag, check to see if it has been preattached.