Precor 5.23 - Manual (Page 48)

Owner’s Manual: Advanced Programming and Troubleshooting 46
10. When you no longer need the information in the error log,
press QUICKSTART for at least four seconds to erase
the error log. Continue to maintain light pressure on the
key until the message CLEAR? appears. Wait four
seconds until OK appears, and then release the key.
Important: You cannot retrieve the error log once you
have deleted it.
When the error log is cleared, 1: — — — appears in the
display indicating that the error messages have been
deleted.
11. When you are ready, press ENTER to move to the next
display (serial number).
Displaying the Serial Number
SERIAL NUMBER appears. The serial number is helpful
when you contact Customer Support.
12. If you have not already done so, write the serial number
onto the Warranty Registration card. You can also
register online at www.precor.com.
Note: If no serial number has been entered, then NONE
appears. Use the serial number found on a label on the
rear cover (Diagram 2).
13. When you are ready, press ENTER to return to the
Precor banner.
EFX_Owners Manual.book Page 46 Friday, June 16, 2006 9:25 AM