Panasonic DP-135FP - Manual (Page 103)

APPENDIX
AP
P
E
ND
IX
103
AP
P
E
ND
IX
Expansion Flash Memory Card
Installing the Expansion Flash Memory Card (1 MB: UE-410045, 2 MB: UE-410046, 4 MB: UE-410047)
Before installing, make sure that there is no document file(s) stored in memory. To confirm, observe the standby
display while the machine is in the FAX Mode and ensure that "00%" percentage is shown.
When the memory card is installed, the machine initializes the document memory, and erases all contents stored
in the document memory.
(see Note 1)
1 Turn the Power Switch OFF.
2 Remove the Memory Card Cover.
3 Gently insert the Memory Card into the card slot.
Important: The Panasonic logo on the Memory
Card must be facing toward the
front of the copier.
CAUTION
!
• Do not install or remove the memory card while the
power switch is ON.
4 Re-install the Memory Card Cover.
5 Turn the Power Switch ON.
6 Print the Fax Parameter List (See page 87) and
confirm that the memory size on Fax Parameter
No. 99. (See page 37 and the Note 1 below)
NOTE
1. Document(s) stored in memory will be lost if the Memory Card is removed.
3
5
4
Card Slot
(Copier left
rear side)
Memory
Card Cover
1
2
Memory
Card Cover
Options and Supplies