Panasonic DP-135FP - Manual (Page 36)

PROGRAMMING YOUR MACHINE
36
34 ENERGY SAVE TIMER 1 5 min. To reduce the power consumption in standby, your machine is
designed to power down to the Energy Saver Mode and Sleep
Mode after a specified period of inactivity. You may change the
delay time to enter into each mode as required.
Energy Saver Mode: Saves energy by consuming less power than
when in standby mode by turning off the fuser
unit after a specified time.
Sleep Mode: This is the lowest power state the machine
enters after the specified time without
actually turning off.
*2 15
3 30
4 60
5 90
6 120
7 180
8 240
SLEEP DELAY TIMER 1 5 min.
*2 30
3 60
4 90
5 180
6 240
35 DAYLIGHT TIME 1 Invalid Selecting whether the clock adjusts for Daylight Saving Time
automatically. The built-in clock will advance 1 hour at 2:00 am on
the first Sunday in April and fallback 1 hour at 2:00 am on the last
Sunday in October.
*2 Valid
36 RING PATTERN
(DRD)
(See Note 2)
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1: A
Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring pattern, except the type C
described above.
37 RCV TO MEMORY
(----)
Enter a 4-digit password used to print out the received document
in memory by using F8-2 (RCV TO MEMORY). When F8-2 is set
to On, this parameter will not be shown on the LCD display. (See
page 67)
39 PIN CODE ACCESS *1 None Selecting the access method (Prefix or Suffix) to dial a number
with PIN Code. (See page 72)
2 Suffix
3 Prefix
52 DIAGNOSTIC
PASSWORD
(----)
Setting the password for Remote Diagnostic Mode. Please ask
your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PASSWORD
(----)
Setting a 20-digit password for secured sub-address
communication.
Continued on the next page.
No. Parameter
Setting
Number
Setting Comments
Fax Parameters