Panasonic DP-135FP - Manual (Page 24)

INSTALLING YOUR MACHINE
24
Setting Your ID Number (Fax Telephone Number)
(see Note 1)
(see Note 2)
If the remote machine does not have a Character ID but has
an ID Number, when sending or receiving, your ID Number
will appear on the remote machine's display and their ID
Number will appear on your display.
We suggest you use your facsimile telephone number as
your ID number. (max. 20 digits)
Make sure that the FAX Mode indicator is ON. If not, press to select the "FAX MODE".
1
2
3
repeatedly until display shows;
4 Enter your ID (max. 20 digits) by using the keypad and
.
Ex:
If you make a mistake, use or to move the cursor
beyond the incorrect number, press
then re-enter the new number.
5
NOTE
1. You may use to enter a "+" character at the beginning of the ID number to indicate the following digit(s) for
your country code.
Ex :+1 201 555 1212
+1 for U.S.A. country code.
+81 3 111 2345 +81 for Japan country code.
2. Your Fax Telephone Number must be set as your ID Number because it is required by the Telephone Consumer
Act of 1991. (For details, see FCC NOTICE at the end of this Operating Instructions)
1 2
4 5
7 8
0
3
6
9 abc..
+ -
FUNCTION SET
7 1
FAX RESET
FAX
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨ ∧
1
1:USER PARAMETERS?
PRESS SET TO SELECT
SET ID NO.
❚
MONITOR
2 0 1 MONITOR 5 5 5
MONITOR 1 2 1 2
CLEAR/STOP
ID NO.
201 555 1212
❚
SET RESET
User Parameters