Paxar Monarch 9414 User Manual

Page 10

Advertising
background image

1-6 Getting Started

14. Plug the printer’s power supply cable (with the

straight end) into the socket on the back of the
printer.

15. Connect the serial cable to the printer’s serial

port.

16. If necessary, adjust the cables. Make sure all the

cables move freely through the openings in the
back of the tray. Use a cable tie to secure them.

17. Lift up the keypad/terminal with one hand and feed

the scanner cable connector through the notch as
shown.

Scanner
Cable

Pow er Cable

Serial Cable

Advertising