Paxar Monarch 9414 - Manual (Page 33)

Care and Maintenance 3-1
C A R E A N D
M A I N T E N A N C E
This chapter tells you how to
♦ clear label jams
♦ clean the printhead
♦ check the software version
♦ clear the buffer.
C l e a r i n g L a b e l J a m s
When you are printing and a jam occurs, the indicator
light turns ORANGE.
To clear the jam:
1. MAKE SURE THE POWER IS OFF. Press (O) to
turn off and (I) to turn on.
2. Press the cover release buttons (on both sides of
the printer) towards the front of the printer. Lift
open the cover.
3. If necessary, remove any supply that has been
previously loaded by pushing out the supply
holder tabs. The supply should lift out of the
printer.
4. Remove the jammed labels. Do not use sharp or
pointed objects to remove labels or damage to
the printhead may occur.
5. Reload the supply. Chapter 2, "Using the Pizza
Hut  Application," for more information.
6. Close the cover until the cover locks in place.
7. Press the FEED button to clear the error. The
indicator light should turn GREEN.
3