Paxar Monarch 9414 - Manual (Page 9)

Getting Started 1-5
The keypad/terminal should not be
operated in a location that has
room temperatures above 158 ° F
or below -4 ° F for extended
periods of time. This could
permanently damage the display.
11. Plug the L-shaped connector into the socket
located on the top of the keypad/terminal (12V).
12. Connect the serial cable to the top of the
keypad/terminal.
13. Place the printer in the tray.
The printer should never be
operated while resting on its side
or upside down.
ALWAYS PLUG THE PRINTER INTO THE
ELECTRICAL WALL OUTLET FIRST AND
THEN TURN ON THE PRINTER - NEVER
TURN ON THE PRINTER AND THEN PLUG IT
INTO THE WALL OUTLET.
L-shaped
Connector
Serial
Cable