Panasonic KX-FLB756E - Manual (Page 22)

20
Setup
Connections !
Telephone
line cord
Connect to “LINE”.
Handset cord
Longer,
uncoiled end
To telephone
network
Mains lead
To Household
Mains Supply
(220–240 V, 50 Hz)
1 Connect the handset cord.
● The plug on the longer,
uncoiled end of the handset
cord should be connected to
the unit.
2 Connect the telephone line cord.
3 Connect the mains lead. (Switch
on AC mains outlet.)
● When the power is turned on
for the first time, the unit will
print some basic information.
Note:
● You can connect an answering machine or extension telephone to the external telephone socket (“EXT”)
on this unit (p. 46, 47).
● When the power is turned on and the display shows the following, unlock the shipping lock (p. 15).
Display:
RELEASE
SHIPPING LOCK
CARRIAGE ERROR
Caution:
● Never install telephone wiring during a lightning storm.
● When you operate this product, the power outlet should be near the product and easily
accessible.
● Be sure to use the telephone line cord included in this unit.
● Do not extend the telephone line cord.
To use the fax machine with a computer on the same line
● We recommend you use separate wall sockets for the fax machine and the computer.
● Set the fax machine to TEL mode (p. 44).
● The device which has the shortest ring setting will answer the call first.
● If the computer provides a port for a telephone line, connect the fax machine to this port on the computer.
/
KX-FLB756E (013-021) 03.2.19 4:12 PM Page 20