Panasonic KX-FLB756E - Manual (Page 66)

Features Summary
64
1. Follow steps 1 and 2 above.
2. Press
+ or - to select “ON”.
3. Press w .
4. Enter your code from 2 to 4 digits,
using 0–9, # and : .
5. Press w .
6. Press p .
● Do not enter “0000”.
Feature & Display Settings How the unit operates
(The default setting is in bold type.)
#39
Changing the display contrast
LCD CONTRAST
=NORMAL
[±]
NORMAL
DARKER
“NORMAL”: For normal contrast
“DARKER”: Used when the display
contrast is too light.
ON
OFF
“ON”: The unit will fit a received
document onto your recording
paper.
“OFF”: The unit will print the
original size.
#37
Receiving other size documents
To receive a fax document that is
longer than your recording paper.
AUTO REDUCTION
=ON
[±]
#41
Changing the fax activation code
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 47).
● This code is also used to receive
a voice message and a fax in the
same call (p. 47).
FAX ACTIVATION
=ON
[±]
ON /
CODE=
? ? #9
OFF
#26
Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=ON
[±]
ON
OFF
“ON”: The unit will print the Caller
ID list automatically after every 30
new calls (p. 30).
How to set menu options
Advanced features (cont.) !
Note:
● Step 3 may be slightly different depending on the
feature.
● See page 60 for more details.
1. Press p .
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w .
5. Press p .
Programming table (cont.)
Code
KX-FLB756E (060-065) 03.2.19 4:22 PM Page 64