Sending faxes, Using the scanner glass – Panasonic KX-FLB756E User Manual

Page 37

Advertising
background image

35

Sending Faxes

1

Open the document cover.

2

Place the document FACE DOWN on the
scanner glass, matching the top edge of the
document to the “ ” mark on the unit.

3

Close the document cover.

If the original is a thick book, do not close
the document cover.

4

If necessary, press

u

repeatedly

to select the desired setting (p. 34).

5

Enter the fax number.

Example:

To send a single page, skip to step 9.

To send multiple pages, go to the next step.

6

Press

ê

to scan the document into

memory.

Example:

!

7

Place the next page on the scanner glass.

NEXT:PRESS SCAN
SEND:PRESS START

PAGES=01

01%

STANDARD

NO.=5678901

Using the scanner glass

By using the scanner glass, you can send a page from booklets or small sized paper that cannot
be sent with the auto document feeder.

Confirm that there are no documents in the auto document feeder.

Document
cover

Scanner glass

FAX START

RESOLUTION

SCAN

STOP

To stop transmission

Press

{

.

Sending report for confirmation

This report will provide you with a printed record
of transmission results. To use this feature,
activate feature #04 (p. 61). For the
communication message in the result column,
see page 66.

8

Press

ê

.

To send more pages, repeat steps
7 and 8.

9

Press

i

.

CONNECTING.....

NEXT:PRESS SCAN
SEND:PRESS START

Journal report

The unit stores the 30 most recent fax
communication results.
— To print manually, see page 80.
— To print automatically after every 30 new fax

communications, activate feature #22 (p. 63).

For the communication message in the result
column, see page 66.

Note for the auto document feeder and the scanner glass

Sending from memory

Quick scan feature

You can scan the document into memory before sending.
1. Insert the document.
2. Enter the fax number.
3. Press

ê

.

Transmitting reservation (Dual Access) feature

You can send the document even when the unit is just
receiving a fax or sending a fax from memory.
1. Insert the document during fax reception or fax memory transmission.
2. Enter the fax number using the dial keypad, one-touch dial

or navigator directory.

3. Press

ê

or

i

.

The document will be fed into the unit
and scanned into memory. The unit will
then transmit the data.
If the document exceeds the memory
capacity (p. 81), sending will be
cancelled. Transmit the entire document
manually.

Note:

Transmitting reservation (Dual Access)
feature is not available when using the
scanner glass.

KX-FLB756E (034-037) 03.2.19 4:16 PM Page 35

Advertising