Patton electronic 29XX - Manual (Page 212)

MFR Version 2—Modify 212
Access Server Administrators’ Reference Guide 17 • MFR Version 2
MFR Version 2—Modify
In the MFR Version 2 Modify window (see figure 89 ) you can modify Line Signalling parameters. The Line
Signalling parameters are link-by-link digital signals that use two signalling channels in each direction per cir-
cuit.
Figure 89. MFR Version 2 Modify window
Line Signalling
This portion of the MFR Version 2—Modify window contains information described in the following sec-
tions.
Set the access server objects based upon codes that pertain to Idle, Seized, Answered, Clear-back, Release, and
Blocked conditions.
Note Line Signalling setup codes are country-specific. Please refer to Recommen-
dation Q.400 -Q.490 and to the host country’s PTT for national signalling
specifications.