Dnis entry window, Wan link (dnispooldesrcwan), Dnis profile (dnispoolassignedprofile) – Patton electronic 29XX User Manual

Page 79: Status (dnispoolstatus), Dnis, Entry window

Advertising
background image

Manage DNIS Window

79

Access Server Administrators’ Reference Guide

7 • Dial In

DNIS Entry Window

Clicking on the ID in the Manage DNIS Window displays the DNIS Entry window (see

figure 32

) where you

can change the DNIS configuration.

Figure 32. DNIS Entry window

WAN Link (dnisPoolDesrcWan)
The WAN link the dial-in user must be connected to in order to use this DNIS configuration.

Note

0 indicates that the WAN Link is not considered when determining if the
dial-in user matches the conditions of the DNIS configuration.

Called (Calling) Number (dnisPoolDesrcDialedNumber)
The number the dial-in user must call in order to use this DNIS configuration. If more than one number is
specified, they must be separated by semi-colons (;).

Note

This field has a limit of 80 characters.

DNIS profile (dnisPoolAssignedProfile)
The DNIS profile used if the dial-in user meets the conditions of this configuration. The profile indicates the
authentication method and IP address pool that the IP address will be selected from for the dial-in user that
matches the conditions of the configuration.

Note

A DNIS profile of 0 indicates that no profile has been selected and the DNIS
configuration is not activated.

Status (dnisPoolStatus)
Indicates if the DNIS Configuration will be used.

•

active(1)—This configuration will be compared to the inbound call and used if the dial-in user meets its
conditions.

•

notUsed(2)—This configuration will not compared to the inbound call to determine if the dial-in user
matches its conditions.

•

destroy(3)—Deletes the DNIS configuration

Advertising