Patton electronic 29XX User Manual

Page 312

Advertising
background image

Configuring a RADIUS server

312

Access Server Administrators’ Reference Guide

C • Technical Reference

Figure 126. Authentication window

2. On the

Authentication

page, define values for the parameters as follows:

– Validation: Select

staticThenRadius(4)

or

radiusUsers(2)

.

Note

We recommend you select

staticThenRadius

then add a static user to the RAS’s

user database. This will provide you an alternate login method so you can still
manage your RAS if RADIUS authentication should fail.

– Host Address: Enter the IP address of your RADIUS server.

– Secondary Host Address: Enter the IP address of your fallback RADIUS server, if you have one. Other-

wise, leave blank.

– Host Port: Enter the UDP Port number your RADIUS server uses to receive authentication requests

(typically 1645 or 1812).

Note

The primary and secondary RADIUS server will use the same port number.

– Timeout: 2 is the default value; leave it alone unless you know better.

– Retries: 3 is the default value; leave it alone unless you know better

– Secret: Enter the secret from your RAS client profile on your RADIUS server.

– NAS Identifier: Optional. You may enter the IP address or ‘friendly name’ of your RAS as defined in

your RADIUS server’s client list.

Advertising