Maintenance, Engine oil – Polaris Trail Blazer 9921773 User Manual

Page 67

Advertising
background image

64

MAINTENANCE

Engine Oil

Oil Recommendations

Polaris recommends the use of Polaris PS-4 PLUS Performance Syn-

thetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may need to

be changed more frequently if Polaris oil is not used. Always use 2W-50

oil. Follow the manufacturer's recommendations for ambient tempera-

ture operation.

NOTICE: Mixing brands or using a non-recommended oil may cause serious

engine damage. Always use the recommended oil. Never substitute

or mix oil brands.

Oil Specifications

Oil Level

The oil dipstick is located on the left side of the vehicle.
1. Position the vehicle on a level surface. Place the transmission in

neutral. Lock the parking brake.

2. Start the engine. Allow it to idle for 30 seconds. Stop the engine.
3. Remove the dipstick. Wipe it dry with a clean cloth.
4. Reinstall the dipstick completely.
5. Remove the dipstick and check the oil level. Add oil as needed.

Maintain the oil level in the safe range. Do not overfill.

6. Reinstall the dipstick.

Lubricant

Capacity

Drain Plug Torque

PS-4 PLUS Performance

Synthetic 2W-50 4-Cycle Oil

1.9 qts. (1.8 l) (with oil cooler)

1.7 qts. (1.6 l) (oil change only)

14 ft. lbs. (19 Nm)

{

Safe Range

Dipstick

Advertising