Polaris Trail Blazer 9921773 - Manual (Page 84)

81
MAINTENANCE
Lights
Poor lighting can result in reduced visibility when driving. Headlight
and taillight lenses become dirty during normal operation. Clean lights
frequently and replace burned out lamps promptly. Always make sure
lights are adjusted properly for best visibility.
Headlamp Replacement
When servicing a halogen lamp, don't touch the lamp with bare fingers.
Oil from your skin leaves a residue, causing a hot spot that will shorten
the life of the lamp.
1. Remove the front cover and unplug the light harness.
2. Remove the rubber cap from the back of the headlight to reveal the
retention screw.
3. Remove the small phillips head screw, and carefully remove the
bulb from the housing.
CAUTION! Hot components can cause burns to skin. Allow lamps to cool
before servicing.
4. Insert the new bulb into the housing and reinstall the retention
screw. Reinstall the rubber cap.
5. Reconnect the light harness and reinstall the cover.
6. Adjust the headlight aim if necessary.