Charger wall mounting, Attaching the belt clip, Charger wall mounting attaching the belt clip – Panasonic KX-TD7694 User Manual
Page 6: Before initial use
Before Initial Use
6
Document Version 2007-06
Charger Wall Mounting
You can attach the handset to your belt by following the steps below.
Charger Wall Mounting
1. Install the two included screws in the wall, spacing them 24.5 mm (1 in)
apart.
2. Mount the charger securely on the wall.
•
Make sure that the wall that the charger will be attached to is strong enough to sup-
port the weight of the handset and charger (240 g [0.53 lb]). If not, it is necessary for
the wall to be reinforced.
•
When this product is no longer in use, make sure to detach it from the wall.
Attaching the Belt Clip
24.5 mm
(1 in)
for charger
Washer
Drive the screw
to this point.
Screws
24.5 mm
(1 in)
[To attach]
[To remove]
Allows phone straps and sim-
ilar objects to be connected.
Insert the clip into the designated notches in the
handset.
Remove the belt clip.