Attaching the lens cap/strap – Panasonic DMC-FZ5GN User Manual

Page 18

Advertising
background image

Preparation

18

VQT0Q40

Attaching the Lens Cap/Strap

Lens Cap (supplied)

1 Pass the string through the hole

on the lens cap.

2 Pass the string through the hole

on the camera.

3 Attach the lens cap.

Strap (supplied)

1 Pass the strap through the hole at

the Strap Eyelet.

2 Pass the strap through the

stopper and fasten the strap.

A: Pull the strap 2 cm or more.

• Attach the strap to the other side of the

camera being careful not to twist it.

• Check that the strap is firmly attached to

the camera.

• Attach the strap so that you can see

“L

UMIX

” logo.

• When you turn the camera off, carry the camera or play back the pictures, attach the lens

cap to protect the surface of the lens.

• Detach the lens cap before turning on the camera in the recording mode.
• When the mode dial is set to one of the recording modes and the camera is turned on

with the lens cap attached, the message [REMOVE LENS CAP AND PRESS

1

BUTTON] appears. Press

1 button after detaching the lens cap.

• Be careful not to lose the lens cap.

VQT0Q40ENG.book 18 ページ 2005年2月16日 水曜日 午後2時47分

Advertising