Panasonic DMC-FZ5GN - Manual (Page 54)

Recording pictures (advanced)
54
VQT0Q40
Recording pictures (advanced)
Using the Mode Dial
When you want the background to be in
sharp focus, set the aperture value to a
higher number. The higher the aperture
value is the smaller the aperture opening
will be. For a soft focus background, set the
aperture value to a lower number which
corresponds to a larger aperture opening.
1 Set the aperture value and take
the picture.
• Refer to P58 for the available range of the
aperture value and the shutter speed.
• The focus range is 5 cm – ¶ (Wide),
2 m – ¶ (Tele).
• If the subject is too bright, set to a larger
aperture value, if too dim, set to a smaller
aperture value.
• The brightness of the screen may differ
from that of the actual pictures. Check it
using review function or setting to the
playback mode.
• The ISO sensitivity cannot be set to
[AUTO]. (P72) (When the recording mode
is switched to Aperture-priority AE, the
ISO sensitivity is automatically set to
[ISO100] even though it was set to [AUTO]
beforehand. You can also change ISO
setting from [ISO80], [ISO200] or
[ISO400] on the menu.)
• When the exposure is not adequate, the
aperture value and the shutter speed on
the screen turn red.
Aperture-priority AE
F2.8
ISO 100
19
2560
EXPOSURE
VQT0Q40ENG.book 54 ページ ２００５年２月１６日 水曜日 午後２時４７分