Panasonic M2616 - Manual (Page 25)

19
System Speed Call
System Speed Call lets you dial Speed Call codes and override all restrictions on
the telephone during the call. See Speed Call for more information on setting up
speed call codes.
To make a System Speed Call:
1. Lift the handset or press a DN Key.
–
2. Press Sys Speed Call.
3. Dial the Speed Call code of the
number you want to dial.
Call Page
Call Page allows you to make an announcement over your paging system by
dialing the page trunk access code.
Attendant consoles using the Page Key override telephones, which are then
disconnected and must re-access the paging trunk.
To use the Call Page feature:
1. Lift the handset or press a DN Key.
2. Dial the paging trunk access code.
You are connected to the paging system.
To disconnect:
or ® Replace the handset or press Release .
Making a call: System Speed Call - Call Page