Panasonic M2616 - Manual (Page 30)

24
4. Dial the party you want to add to the
conference.
ø
5. Press Conference .
Hot Line
The system administrator can program a Hot Line telephone number that is dialed
automatically.
To use Hot Line:
¥
Press Hot Line . The Hot Line number is
dialed automatically.
or
If your main DN is a Hot Line, Lift the
handset . The Hot Line number is dialed
automatically.
Radio Paging
Your Meridian 1 system may be equipped with an on-site Radio Paging system. If
you stay on the line, the paged person may answer the call by entering a special
Paging “Meet - me” code from any DN.
Note: This feature is not available in all areas or on all systems.
Radio Paging Access
Automatic Pre - selection
(“Meet - me” paging). You wish to contact a person. They are
either busy on a call or you wish to page
someone without calling their DN. You
wish to directly alert their radio paging
device.
1. Lift the handset or press a DN Key.
2. Dial the Radio Paging FFC . You hear
paging dial tone.
3. Dial the DN of the party to be paged.
You hear ringback tone.
Making a call: Hot Line - Radio Paging