Panasonic M2616 - Manual (Page 26)

20
Override
You can override a busy signal and interrupt another call. This feature is called
Busy Override on the MSL-100.
To override a busy/engaged signal:
1. You dial a telephone number and hear
busy signal.
£
2. Press Override . The people on the call
in progress hear a tone for
approximately one second; the three
of you are then connected together. A
short tone repeats every 16 seconds.
Override, Enhanced
Enhanced Override allows you to override an ongoing call after you have
attempted a Forced Camp-on. Use Enhanced Override when making either a
simple call or a consultation call (i.e., place a call on hold and call another party).
To use Enhanced Override:
1. You dial a telephone number and hear
a busy signal.
£
2. Press Override to initiate a Forced
Camp-on. If either of the people on the
call disconnects at this time, you
receive a fast busy signal.
£
3. Press Override . The people on the call
in progress hear a tone for
approximately one second; the three
of you are then connected together. If
anyone disconnects, the other two
persons will remain connected.
Making a call: Override - Override, Enhanced