Panasonic KX-FLB881 - Manual (Page 55)

9. Programmable Features
55
Setting the Error Correction
Mode (ECM)
{#}{
4}{1}{3}
This feature is available when the sending / receiving fax machines are ECM
compatible.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): If there is an error during fax transmission / reception, the
unit will support the communication.
Setting the connecting tone
{#}{
4}{1}{6}
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
L The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{
4}{3}{0}
{ 0} “ OFF” (default)
{ 1} “ ON”
See page 49 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{
4}{3}{1}
{ 1} “ A”
{ 2} “ B”
{ 3} “ C”
{ 4} “ D”
{ 5} “ B-D” (default)
See page 49 for details.
Setting auto reduction
feature
{#}{
4}{3}{2}
To receive a fax document that is longer than your recording paper.
{
0} “ OFF”: The unit will print the original size.
{ 1} “ ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{
4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{ 0} “ OFF”
{ 1} “ ON” (default)
1. {MENU} i {#}{4}{3}{4}
2. Press {1} to select “ ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is “; #9”.
L Do not enter “0000”.
4. {SET} i {MENU}
Setting the memory reception
alert
{#}{
4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{
4}{3}{8}
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
{
0} “ OFF”: You have to press {START} for fax reception.
{ 1} “ ON” (default): You do not have to press {START} for fax reception.
Feature/Code Selection
FLB881-PFQX2732ZA-OI-en.book Page 55 Wednesday, July 18, 2007 11:22 PM