Panasonic KX-FLB881 - Manual (Page 59)

9. Programmable Features
59
Setting the font pitch/point in
PCL
{#}{
7}{7}{0}
To set the font pitch/point to be used in PCL printing.
1. {MENU} i {#}{7}{7}{0} i {SET}
2. Enter the font pitch from “ 00.44” to “99.99”, or the point from “004.00”
to “ 999.75”, using the dial keypad.
L The default pitch is “ 10.00” and the default point is “012.00”.
3. {SET} i {MENU}
Setting the symbol set in PCL
{#}{
7}{7}{1}
To set the symbol set to be used in PCL printing.
1. {MENU} i {#}{7}{7}{1}
2. Press {V} or {^} repeatedly to display the desired symbol set. i {SET}
i {MENU}
Setting the line breaks in PCL
{#}{
7}{7}{2}
To set each behavior when receiving CR, LF, and FF codes.
{
1} “ CR/LF/FF” (default): CR=CR, LF=LF, FF=FF
{ 2} “ CR+LF/LF/FF”: CR=CR+LF, LF=LF, FF=FF
{ 3} “ CR/CR+LF/CR+FF”: CR=CR, LF=CR+LF, FF=CR+FF
Setting the waiting time for
auto continue mode
{#}{
7}{7}{3}
To set the length of time before the unit recovers if memory overflow occurs.
{
1} “ OFF” (default): Deactivates this feature.
{ 2} “ 20s”: 20 seconds
{ 3} “ 30s”: 30 seconds
{ 4} “ 60s”: 60 seconds
{ 5} “ 90s”: 90 seconds
{ 6} “ 120s”: 120 seconds
Changing the data timeout
setting
{#}{
7}{7}{4}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. {MENU} i {#}{7}{7}{4} i {SET}
2. Enter the desired data timeout setting from “ 005” seconds to “600”
seconds, using the dial keypad.
L The default setting is “ 060” seconds.
3. {SET} i {MENU}
Feature/Code Selection
FLB881-PFQX2732ZA-OI-en.book Page 59 Wednesday, July 18, 2007 11:22 PM