Panasonic KX-FLB881 - Manual (Page 65)

10. Useful Information
65
10.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
1 Start Multi-Function Station.
2 [ Utilities] i [Device Monitor]
L The [Device Monitor] window will appear.
3 Confirm the status of the unit.
[
Status]: Current status of the unit
Note:
L Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[
Status] tab by clicking [Advanced Information].
L The status of the unit will be updated by clicking
[
Refresh].
L If a printing error occurs, the Device Monitor will be
started automatically and display the error
information.
L For details, see the help file by selecting [p] from
Multi-Function Station.
10.2.3 Using the web browser (LAN
connection only)
You can confirm the setting information and status of the
unit from the web browser.
1 Start Multi-Function Station. i [Utilities] i
[
Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2 Select the category from the menu bar.
[
Status]: Toner and paper information, etc.
[ Device]: Current status of the unit, etc.
[ Network]: Network information, etc.
L When you select [Device] or [Network], you
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
3 Confirm the status of the unit.
Note:
L The status of the unit will be updated by clicking
[
Reload].
10.3 Changing the default output
tray
To change the default output tray when printing, proceed
as follows.
1 [ Start]
2 Open the printer window.
For Windows 98/Windows Me/Windows 2000:
[
Settings] i [Printers]
For Windows XP Professional:
[
Printers and Faxes]
For Windows XP Home:
[
Control Panel] i [Printers and Other
Hardware] i [Printers and Faxes]
For Windows Vista:
[
Control Panel] i [Printers]
3 Select the unit’s name.
4 Select [Properties] from the [File] or [Organize]
menu.
L The printer properties window will appear.
L For Windows 2000, Windows XP and Windows
Vista users, click [Printing Preferences...] on
the [General] tab.
5 Select the desired output tray on the [Output] tab.
6 [ OK]
L The selected output tray will be set as default.
L For details, see the help file by selecting [p]
from Multi-Function Station.
10.4 Canceling the operations
You can cancel the current operation from the unit. You
can also select the desired operation to cancel.
1 { STOP}
L “ USER STOPPED” is displayed.
L When “ USER STOPPED” is not displayed, go to
step 2.
2 To cancel printing:
Press {STOP} repeatedly to display “ STOP
PRINTING?”.
To cancel scanning:
Press {STOP} repeatedly to display “ STOP
SCANNING?”.
To cancel copying:
Press {STOP} repeatedly to display “ STOP
COPYING?”.
To cancel sending or receiving faxes:
Press {STOP} repeatedly to display “ STOP FAX?”.
To cancel broadcast transmission:
Press {STOP} repeatedly to display “ BROAD
CANCELED?”.
To cancel fax redialing:
Press {STOP} repeatedly to display “ SEND
CANCELED?”.
3 { SET}
FLB881-PFQX2732ZA-OI-en.book Page 65 Wednesday, July 18, 2007 11:22 PM