Using an external unit, Optional antenna connections, Using headphones (not included) – Panasonic SC-AK210 User Manual

Page 12: External unit connections, Recording

Advertising
background image

RQT6713

12

75

Ω coaxial cable

(not included)

1

2

(For United Kingdom only)
Antenna plug
adaptor (included)

FM outdoor antenna
(not included)

30

mm

15

mm

1

2

3

Shield braid

Core wire

Reducing noise when recording AM

Remote control only
Hold down [PLAY MODE] while recording.
Every time you hold down the button: BP1

↔ BP2

Choose the setting with the least noise.

Notes

Changes to volume and sound/field quality do not affect recording.

You cannot open deck 1 while recording.

You cannot fast-forward or rewind one deck while recording with
the other.

When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.

Recording

Use outdoor antenna if radio reception is poor.

FM outdoor antenna

Run a piece of vinyl wire horizontally across a window or other
convenient location.
Leave the loop antenna connected.

Note

Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm.

Using an external unit

AUX

REC

Erasure prevention

Use a screwdriver or similar
object to break out the tab.

To re-record on a protected cassette

Cover the hole with adhesive tape.

To erase a tape
1. Press [:, TAPE] and then [L, STOP].
2. Insert the recorded tape into deck 2.

Ensure there is no tape in deck 1.

3. Press [a REC].

Optional antenna connections

AM outdoor antenna

Disconnect the FM indoor antenna.

The antenna should be installed by a competent technician.

For Australia and
New Zealand

Using headphones (not included)

For Australia and
New Zealand

For Europe

Reduce the volume level and connect the headphones.
Plug type: 3.5 mm stereo

Note

Avoid listening for prolonged periods of time to prevent hearing damage.

(See above for external unit connection)
1.

Press [AUX].
The unit comes on.

2.

For listening : Proceed to step 3
For recording : Press [a REC] (recording starts).

3.

Start playback from the external source. (For details, refer to the
external unit’s instruction manual.)

External unit connections

An analogue player with a built-in phono equalizer can be connected.

For details, refer to the instruction manual of the units which are to
be connected.

When units other than those described above are to be connected,
please consult your audio dealer.

Headphones

(not included)

For Europe

AM outdoor antenna

(not included)

AM loop
antenna
(included)

Optional antenna connections

Analogue player
(not included)

Rear panel of

this unit

(L)

(R)

R

L

5 -12 m

1

2

2

1

Side A

Tab for side B

Tab for side A

Adhesive tape

Advertising
This manual is related to the following products: