Panasonic SC-AK210 - Manual (Page 16)

Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
RQT6713-2B
G1002CP2013
En
Specifications
SPEAKER SECTION SB-AK210
Type 2 way, 2 speaker system
Speaker(s)
Woofer 16 cm cone type
Tweeter 6 cm cone type
Impedance
HIGH 6 Ω
LOW 6 Ω
Input power
HIGH 110 W (Music)
LOW 110 W (Music)
Output sound pressure level
86.8 dB/W (1.0 m)
Cross over frequency 3.5 kHz
Frequency range 45 Hz–25 kHz (–16 dB)
60 Hz–24 kHz (–10 dB)
Dimensions (WxHxD) 220 x 330 x 227 mm
Mass
3.1 kg
SPEAKER SECTION SB-AK110
Type 2 way, 2 speaker system
Speaker(s)
Woofer 16 cm cone type
Tweeter 6 cm cone type
Impedance 6 Ω
Input power 160 W (Music)
Output sound pressure level
86.8 dB/W (1.0 m)
Cross over frequency 4 kHz
Frequency range 45 Hz–30 kHz (–16 dB)
60 Hz–26 kHz (–10 dB)
Dimensions (WxHxD) 220 x 330 x 227 mm
Mass
3.0 kg
GENERAL
Power supply AC 230-240 V, 50 Hz
Power consumption
SC-AK310 SC-AK210 170 W
SC-AK110 174 W
Dimensions (WxHxD) 250 x 330 x 370 mm
Mass SC-AK310 SC-AK210 7.0 kg
SC-AK110 7.2 kg
Power consumption in standby mode:
Approx. 0.5 W
Notes
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. Except SB-AK110
The labels “HIGH” and “LOW” on the rear
of the speakers refer to High frequency
and Low frequency.
AMPLIFIER SECTION SC-AK310
RMS Power output
10% Total harmonic distortion
1kHz, both channels driven
(Low channel) 55 W per channel (6 Ω)
10 kHz, both channels driven
(High channel) 55 W per channel (6 Ω)
Total Bi-Amp power
110 W per channel
Input sensitivity
AUX 250 mV
Input impedance
AUX 13.3 k Ω
AMPLIFIER SECTION SC-AK210
RMS Power output
10% Total harmonic distortion
1 kHz, both channels driven
(Low channel) 55 W per channel (6 Ω)
10 kHz, both channels driven
(High channel) 55 W per channel (6 Ω)
Total Bi-Amp power 110 W per channel
Input sensitivity
AUX 250 mV
Input Impedance
AUX 13.3 k Ω
AMPLIFIER SECTION SC-AK110
Power output
10% Total harmonic distortion
1 kHz, both channels driven
80 W per channel (6 Ω)
Total power 80 W per channel
Input sensitivity
AUX 250 mV
Input Impedance
AUX 13.3 k Ω
FM TUNER SECTION
Frequency range
87.50 – 108.00 MHz (50 kHz steps)
(For Europe)
Sensitivity 1.8 µV (IHF)
S/N 26 dB 1.5 µV
(For Australia and New Zealand)
Sensitivity 2.5 µV (IHF)
S/N 26 dB 2.2 µV
Antenna terminal(s) 75 Ω (unbalanced)
AM TUNER SECTION
Frequency range
522 – 1629 kHz (9 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz) 560 µV/m
CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100 kHz
Erasing system AC erase 100 kHz
Tape speed 4.8 cm/s
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL (TYPE I) 35 Hz – 14 kHz
S/N 50 dB (A weighted)
Wow and flutter 0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
CD SECTION
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Pickup
Beam source/wavelength
Semiconductor laser/780 nm
(For Norge)
Bølgelengde
780 nm
Laserstyrke
Ingen farlig stråling sendes ut
Number of channels Stereo
Frequency response
20 Hz–20 kHz (+1, –2 dB)
Wow and flutter Below measurable limit
Digital filter 8 fs
D/A converter MASH (1 bit DAC)
SPEAKER SECTION SB-AK310
Type 3 way, 3 speaker system
Speaker(s)
Woofer 16 cm cone type
Tweeter 6 cm cone type
Super tweeter 2.5 cm Piezo type
Impedance
HIGH 6 Ω
LOW 6 Ω
Input power
HIGH 110 W (Music)
LOW 110 W (Music)
Output sound pressure level
86.5 dB/W (1.0 m)
Cross over frequency 3.5 kHz, 10 kHz
Frequency range 35 Hz–25 kHz (–16 dB)
47 Hz–24 kHz (–10 dB)
Dimensions (WxHxD) 227 x 344 x 243 mm
Mass
3.3 kg