Panasonic CQ-5100U - Manual (Page 17)

CQ-5100U
17
Listening to the portable audio device
q Turn on the connected portable audio device and play the music.
w Press [MODE] (POWER) to change to AUX mode. The sound of the portable audio device is output through the
speakers.
Display change
Press [DISP] to change the display.
AUX input mode (default)
Clock display
Radio CD player AUX Mode
( When a CD disc is loaded )
“AU In” will be displayed when
switch to the AUX mode.
Notes:
• If you disconnect the mini-plug cable and connect it again in AUX mode, noise is generated and may cause
speaker damage. Disconnect or connect the mini-plug cable after turning the unit's power off or switching it to
another mode.
• Each device has a different output level. Be sure that the volume is not too high.
• If the input volume of the connected device is high, the distortion may result. In such cases, adjust the volume on
the connected device.
• For the power source of the portable audio device, use a battery, etc., provided with the device. If the device is
powered through a cigarette lighter socket or accessory socket of the car, noise may be generated.