Panasonic CQ-5100U - Manual (Page 18)

CQ-5100U
18
Troubleshooting
No power.
Trouble
Vehicle’s ignition switch is not on.
a Turn your vehicle’s ignition switch to ACC or ON.
Cables are not correctly connected.
a Connect cables correctly.
Power connector is not correctly connected.
a Connect the power connector to the terminal that is always active.
Power connector is not correctly connected.
a Connect the power connector to your vehicle’s ACC source.
Grounding wire is not correctly connected.
a Connect the grounding wire to a metal part of the vehicle.
Mute is set to ON.
a Set it to OFF.
Cables are not correctly connected.
a Connect cables correctly.
The ground lead is not connected properly.
a Connect the ground lead properly.
Check point
Troubleshooting Tips
❐ Common
No sound.
Noise.
Warning
¡ Do not use the unit in an irregular condition,
for example, without sound, or with smoke
or a foul smell, which can cause ignition or
electric shock. Immediately stop using the
unit and consult your dealer.
¡ Never try to repair the unit by yourself
because it is dangerous to do so.
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only by
qualified personnel. Please refer the checking and the repair to
professionals. Panasonic shall not be liable for any accidents
arising out of neglect of checking the unit or your own repair
after your checking.
Never take measures especially for those other than
indicated by italic letters in “Check point” described below
because those are too dangerous for users to handle
themselves.