Philips Lightolier E1 Series - Manual

E1 Series
6 V, 12
TO
25 W C
OMMERCIAL
E
MERGENCY
L
IGHTING
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Illumination
is provided by two high
performance lamp reflector
systems integral to the housing.
Each lamp reflector system
can be adjusted 180° vertically,
and 180° horizontally. A high-
impact polycarbonate diffuser
utilizes linear frosted sections
to control sight-line glare, and
maximize reflector efficiency.
Lamp wattages range from 6
to 9 W.
Housing: Constructed
of impact-resistant, UL 94
V-0, 5 VA thermoplastic.
Thermoplastic backplate
is provided with matching
knockouts for easy installation
to standard junction boxes.
Installation is further
simplified by the use of a
snap-together backplate and
housing. A modular plug-
in wiring harness will allow
line voltage connections in
either the junction box or
product housing. Utility supply
connection is completed by
snapping the housing and
backplate together forming
a secure mechanical and
electrical connection.
Operating Temperature
Range: Standard Location
65°F (19°C) to 85°F (30°C)
Diagnostics: 120/277 VAC
dual voltage input with surge-
protected, solid-state fully-
automatic, voltage regulated
charger. Charging system is
complete with low voltage
Disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Electrical Specifications:
12 W unit:
0.112 A (120 VAC)
0.062 A (277 VAC)
14-18 W unit:
0.077 A (120 VAC)
0.034 A (277 VAC)
Code Compliance
UL 924 listed. NFPA 101,
NEC, BOCA, OSHA and IBC
illumination standards. Meets
ADA specifications for wall
mounted lighting fixtures.
Warranty
Three year full electronics
warranty. One year full plus
four year prorated lead calcium
battery warranty. Five year full
plus five year prorated nickel
cadmium battery warranty.
E112LT7W
15.5"
(39.4 cm)
3.8"
(9.6 cm)
5.5"
(14.0 cm)