Help m essage/ speci fi cati o ns, En gl is h – Panasonic Sa-xr57 User Manual

Page 38

Advertising
background image

38

RQT8552

Help message

Specifications (DIN 45 500)

n

AMPLIFIER SECTION

Power output (at AC 230-240 V)

DIN 1 kHz (T.H.D. 1 %)

2 x 100 W (6 Ω)

20 Hz-20 kHz continuous power output both channel driven

2 x 80 W (6 Ω)

Total harmonic distortion

rated power at 20 Hz-20 kHz

0.09 % (6 Ω)

Power bandwidth

both channel driven, –3 dB

4 Hz to 88 kHz (6 Ω, 0.9 %)

Power output each channel driven (at AC 230-240 V)

DIN 1 kHz (T.H.D. 1 %)

Front (L/R)

100 W (6 Ω)

Center

100 W (6 Ω)

Surround (L/R)

100 W (6 Ω)

Surround Back (L/R)

100 W (6 Ω)

Load impedance

Front (L/R)

A or B

6 to 16 Ω

A and B

6 to 16 Ω

BI-WIRE

6 to 16 Ω

Center

6 to 16 Ω

Surround (L/R)

6 to 16 Ω

Surround Back (L/R)

6 to 16 Ω

Frequency response

CD, DVD, DVD Recorder, VCR, TV/STB, AUX

4 Hz to 88 kHz, ±3 dB

DVD 6CH

4 Hz to 44 kHz, ±3 dB

Input sensitivity and impedance

CD, DVD/DVD 6CH, DVD Recorder, VCR, TV/STB, AUX

200 mV/22 kΩ

S/N at rated power (6 )

CD, TV/STB, DVD, DVD Recorder (Digital input)

90 dB (IHF, A: 103 dB)

Tone controls

BASS

50 Hz, +10 to –10 dB

TREBLE

20 kHz, +10 to –10 dB

Channel balance (250 Hz-6.3 kHz)

±1 dB

Channel separation

55 dB

Subwoofer frequency response (–6 dB)

7 Hz to 200 Hz

n

FM TUNER SECTION

Frequency range

87.50 to 108.00 MHz

Sensitivity

S/N 30 dB

1.5 µV/75 Ω

S/N 26 dB

1.3 µV/75 Ω

S/N 20 dB

1.2 µV/75 Ω

IHF usable sensitivity (IHF ’58)

1.5 µV/75 Ω

IHF 46 dB stereo quieting sensitivity

22 µV/75 Ω

Total harmonic distortion

MONO

0.2 %

STEREO

0.3 %

S/N

MONO

60 dB

STEREO

58 dB

Frequency response

20 Hz to 15 kHz,

+1 dB, –2 dB

Alternate channel selectivity

±400 kHz,

65 dB

Capture ratio

1.5 dB

Image rejection at 98 MHz

40 dB

IF rejection at 98 MHz

70 dB

Spurious response rejection at 98 MHz

70 dB

AM suppression

50 dB

Stereo separation

40 dB

Carrier leak

19 kHz, –30 dB

38 kHz,

–50 dB

Channel balance (250 Hz-6.3 kHz)

±1.5 dB

Limiting point

1.2 µV

Bandwidth

IF amplifier

180 kHz

FM demodulator

1000 kHz

Antenna terminal

75 Ω (unbalanced)

n

AM TUNER SECTION

Frequency range

522 to 1611 kHz (9 kHz steps)

530 to 1620 kHz (10 kHz steps)

Sensitivity

20 µV, 330 µV/m

Selectivity (at 999 kHz)

55 dB

IF rejection (at 999 kHz)

50 dB

n

VIDEO SECTION

Output voltage at 1 V input (unbalanced)

1±0.1 Vp-p

Maximum input voltage

1.5 Vp-p

Input/output impedance

75 Ω (unbalanced)

S-Video Input

DVD, DVD Recorder, TV/STB

Output

TV MONITOR

Component Video Input

DVD Recorder, TV/STB

Output

TV MONITOR

n

GENERAL

Power supply

AC 230 to 240 V, 50 Hz

Power consumption

140 W

Dimensions (W x H x D)

430 mm x 107.5 mm x 390 mm

Mass

4.7 kg

Notes:
1. Specifications are subject to change without notice.

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum analyzer.

Message

Cause/countermeasure

1

Muting is on.
Press [MUTING] on the remote
control and cancel the function
(á page 27).

2

The selected mode is not “

MUSIC ”.

Change the mode to “

MUSIC

(á page 24).

3

Center and surround speakers are
not connected, or they are set as
absent. Connect the speakers
(á page 11) or change their setting
to present (á page 31).

4

Surround and surround back
speakers are not connected, or
they are set as absent. Connect
the speakers (á page 11) or
change their setting to present
(á page 31).

5

Surround back speakers are not
connected, or they are set as
absent. Connect the speakers
(á page 11) or change their setting
to present (á page 31).

Message

Cause/countermeasure

6

You are trying to use the effect
unavailable for DTS-ES sources.

7

You are trying to use the effect
unavailable for DVD-Audio
sources.

8

You are trying to use the effect
unavailable for DVD analogue 6-
channel playback.

9

You are trying to use the effect
unavailable for the current input
source.

10

(flashing)

The unit is in the “

PCM FIX ” mode.

Cancel this mode (á page 32).

11

SPEAKERS A is off. Press
[SPEAKERS A] to turn on
“SPEAKERS A” (á page 16).

12

SPEAKERS A and SPEAKERS B
are off. Select one of the speakers
(á page 16).

Digital input

(Optical)

2

(Coaxial)

2

HDMI (Version 1.2a) Input

1

Output

1

Power consumption in standby mode:

0.9 W

Power consumption in HDMI off Mode:

0.35 W

H

elp m

essage/

Speci

fi

cati

o

ns

E

N

GL

IS

H

Advertising