Panasonic PT-D7700E - Manual (Page 104)

104
Appendix
640 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1 024 x 768
1 024 x 768
1 024 x 768
1 024 x 768
1 024 x 768
1 024 x 768i
1 024 x 768
1 024 x 768
1 152 x 864
1 152 x 864
1 152 x 864
1 120 x 750
1 120 x 750i
1 280 x 1 024
1 280 x 1 024
1 280 x 1 024
1 280 x 1 024
1 280 x 1 024
1 280 x 1 024i
1 280 x 1 024i
1 400 x 1 050
1 400 x 1 050
1 400 x 1 050
1 600 x 1 200
832 x 624
1 152 x 870
1 920 x 1 080i
1 280 x 720
720 x 480i
720 x 576i
720 x 483
720 x 576
24.8
31.5
31.5
35.0
37.9
37.5
43.3
32.1
35.2
37.9
48.1
46.9
53.7
48.4
56.5
60.0
65.5
68.7
35.5
80.7
94.0
63.9
67.5
77.1
50.1
32.6
52.4
64.0
78.2
80.0
91.2
46.2
47.6
65.2
78.8
82.2
75.0
49.7
68.6
33.75
45.0
15.7
15.6
31.5
31.25
56.4
70.1
59.9
66.7
72.8
75.0
85.0
51.0
56.3
60.3
72.1
75.0
85.1
60.0
70.1
75.0
81.6
85.0
86.8
100.8
120.0
70.0
75.0
85.0
60.1
80.0
50.0
60.0
71.7
75.0
85.0
86.0
88.9
60.0
72.0
75.0
60.0
74.6
75.0
60.0
60.0
59.9
50.0
59.9
50.0
Applicable input signal data
Display mode
VGA400
VGA480
XGA
MXGA
SVGA
SXGA
SXGA+
UXGA
MAC16
MAC21
1080 / 60i
720 / 60p
480i
576i
480p
576p
Number of displayed dots Horizontal scanning frequency (kHz) Vertical scanning frequency (Hz)
• The number of display dots of the PT-D7700E is 1 400 x 1 050. If signals with a number of display
dots differing from the data listed above are supplied, they will be converted into signals with 1 400 x
1 050 dots and displayed.
• The number of display dots of the PT-DW7000E is 1 366 x 768. If signals with a number of display
dots differing from the data listed above are supplied, they will be converted into signals with 1 366 x
768 dots and displayed.
• Character “i” that follows the number of displayed dots stands for interlace signal.
• Flicker (line flicker) will be caused in images if interlace signals are connected.
Note
<Compatible RGB/YP B P R Signals>
The following table specifies the types of RGB/ YP
B
P
R
signals compatible with the projector.
RGB signals can also be input within the range of fH=15 kHz–100 kHz, fV=24 Hz–120 Hz, dot clock=20 MHz–162 MHz.