Panasonic PT-D7700E - Manual (Page 63)

ENGLISH
63
How to change the system format
Pressing the SYSTEM SELECTOR button on the remote control or using the menu screen operation (page 81)
enables the user to make the following changes depending on S Video / Video input or the currently selected input
module.
The name of the selected system such as RGB, YP
B
P
R
and AUTO is displayed on the top left of the screen and
disappears automatically.
Input module
ET-MD77SD1 : AUTO 480i 576i
ET-MD77SD3 :
S video / Video terminal input signal
: AUTO1 NTSC PAL SECAM
PAL60 NTSC4.43
: AUTO2 NTSC PAL-M
PAL-N
For the setting
of AUTO1
For the setting
of AUTO2
AUTO
576i 480i 720/50p 1 080/24sF 1 080/25p 1 080/30p
1 080/60i 1 035/60i 720/60p 1 080/24p 1 080/50i
When the STD (standard) button is pressed while changing the system mode (with the SYSTEM
SELECTOR), the projector automatically returns to AUTO1, AUTO2, or AUTO.
“AUTO 1”: Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60.
“AUTO 2”: Selection is automatically made out of NTSC, PAL-M and PAL-N.
RGB1/RGB2 terminal input signals
For 720p, 1 080i input: RGB YP B P R
For 480i, 576i, 480p, 576p input: RGB YCbCr
For the signals other than those above, SYSTEM SELECTOR button is invalid.